Key Points For Daily Maintenance Of Spray

Jun 14, 2025

Leave a message

The spray is widely used in many fields such as agricultural production. Good daily maintenance will help extend its service life and ensure the spray effect. The following are the daily maintenance points of different types of spray:

Maintenance points of electric super capacity spray
washing nozzle
The nozzle is a key component for storing and spraying medication, and particles, impurities, etc. in the medication can easily clog the nozzle. Failure to clean it in a timely manner can affect the spraying effect. It should be cleaned regularly. First, remove the nozzle, then use a brush or compressed air to remove blockages, and finally reinstall the nozzle.

Check the infusion pipeline
The infusion pipeline is the pipeline for the transportation and storage of liquid medicine. If there are sundries or damages in the pipeline, the normal transportation and spray effect of liquid medicine will be affected. Regularly check for debris, bacteria, foreign substances, etc., and promptly replace or repair any problems found.

Proper storage of medication
When storing drugs, they should be classified according to their properties to avoid mutual contamination between different drugs. Each type of medication has its own storage method and shelf life, and should be stored according to the medication instructions, while avoiding direct sunlight, prolonged high temperatures, and humid environments to ensure that the medication can be stored and used for a long time.

Refueling and changing oil
Adding clean oil without impurities can make the spray run more smoothly, reduce the friction and wear of the machine, and extend the service life of the equipment. When refueling, pay attention to the appropriate amount of fuel, regularly change the oil and check the fuel level.

Maintain the motor
Motor is an important part of electric super capacity spray, and its operation will directly affect the spraying effect. During maintenance, attention should be paid to preventing problems such as water ingress, sand ingress, overload, and power outage of the motor. The motor can be inspected, cleaned, and maintained according to the instructions.

Maintenance points of ordinary spray
Timely cleaning of components
After the spray is out of service, it is necessary to clean the liquid medicine barrel, rubber hose, spray bar and other parts, and pay special attention to removing the oil dirt on the air pump and the soil at the bottom concave of the liquid medicine barrel. Most pesticides have a corrosive effect. After discontinuation, rinse with alkaline water and then rinse thoroughly with clean water. After spraying Bordeaux mixture, it is best to soak it in alkaline water for 1-2 hours because Bordeaux mixture is highly corrosive.

Prevent rusting
All detachable components should be removed and washed clean, taking care to prevent rusting.

Maintenance points of spray machine (power driven)
Rinse with clean water
After spray every day, spray with clean water for a few minutes to remove the residual liquid medicine in the liquid medicine tank, liquid pump and pipeline, and then drain the clean water.

Operate according to the instructions
According to the machine manual, check and adjust the technical status of each component, and lubricate each lubrication point.

Proper storage
After all operations are completed, if the storage time is long, in addition to cleaning the components such as the liquid tank, liquid pump and pipeline, the parts such as the V-belt, spray hose, nozzle, mixer and suction pipe should also be removed. After cleaning, they should be placed together with the machine body in a cool and dry place.

Send Inquiry