Daily cleaning tools
Soft bristle brush
Soft bristle brush is a commonly used cleaning tool, which has a soft texture and can effectively avoid scratching the surface of the nozzle when cleaning it. When in use, you can gently brush the outside and inside of the nozzle with a soft bristled brush to remove any attached dirt. For example, when cleaning some ordinary household spray nozzles, the soft bristle brush can play a very good role.
Toothpick or fine needle
For dirt stuck in the nozzle hole, toothpicks or fine needles can help to clear it. However, be very careful in use to avoid damaging the orifice of the nozzle, which will affect the spray effect. For example, when the orifice of the spray nozzle is blocked by fine particles, the problem can be solved by gently dredging with a toothpick or a fine needle.
Deep cleaning tool
ultrasonic cleaning equipment
Ultrasonic cleaning equipment utilizes the high-frequency vibration of ultrasonic waves and the chemical action of cleaning agents to effectively remove dirt and carbon deposits inside the fuel injector, resulting in a good cleaning effect. After removing the nozzle, place it in an ultrasonic cleaning device and use a suitable cleaning agent to thoroughly clean the nozzle. But this method requires professional equipment and certain operational skills, and is suitable for scenarios that require high cleaning efficiency, such as cleaning car fuel injectors.
Special cleaning agent
Specialized cleaning agents can effectively dissolve and remove different types of dirt. When cleaning the nozzle of spray, it is very important to choose a cleaner with reliable quality produced by a regular manufacturer. Poor quality cleaner may cause damage to the nozzle. For example, when performing non disassembly cleaning, a specialized cleaning agent is used to introduce the cleaning agent into the fuel injector through the fuel system, and the fuel injector is cleaned during engine operation.
Disinfection tools
chlorine disinfection solution
For spray nozzles used in medical or sanitary fields, disinfection treatment is required after cleaning. Chlorine containing disinfectant can effectively kill bacteria and viruses. The cleaned nozzle can be soaked in chlorine containing disinfectant (in a ratio of 1:50) for half an hour, then rinsed with clean water and dried
