The design features of spray nozzle are mainly reflected in its structure and function to meet different application requirements. The following are the design features of several common spray nozzles:
1. Fan shaped atomizing nozzle
Structural features: Fan shaped nozzles are usually formed by a cross shaped and non conical nozzle, with a V-shaped groove at the nozzle head to form a narrow nozzle.
Advantages: The spray channel is large and smooth, reducing blockage; The fan-shaped section of spray produces a gradually thinning edge, and the droplet size is medium; Can be installed or replaced on most pipeline systems.
2. Spiral atomizing nozzle
Structural features: The spiral nozzle is equipped with a spiral guide section inside, which can disperse liquids and form an umbrella shaped water curtain.
Advantages: solid cone or hollow cone spray can be produced; Wide range of jet angles (50-170 degrees); It has ideal spray coverage and large spray area 3.
3. Hollow cone atomizing nozzle
Structural features: the hollow cone nozzle adopts the hollow spray mode, which is simple in structure, and the spray form is conical hollow circular.
Advantages: Uniform atomization, not easily clogged; Uniform distribution, wide applicability of pressure and flow rate; It can effectively atomize liquids even at lower pressures.
4. Solid cone atomizing nozzle
Structural features: The solid cone nozzle has a detachable cap and blades, which can be matched with the manifold and multiple branches.
Advantages: solid conical spray shape, producing a circular strike area; Uniform distribution, wide applicability of pressure and flow rate; The unique blade design provides excellent control and uniform spray distribution.
5. Fine atomization nozzle
Structural features: the fine atomizing nozzle is inlaid with stainless steel nozzle core and guide vane, and contains an anti drip device. The micro hollow conical atomizing spray is formed by hydraulic pressure.
Advantages: No need to use compressed air, very fine atomization effect can be formed using hydraulic pressure; Very fine particles, forming foggy spray effect; Easy to detect or clean.
6. Air atomizing nozzle
Structural features: The air atomizing nozzle includes an automatically operated cylinder, cleaning needle, siphon or gravity feeding configuration, internal or external mixing device, etc.
Advantages: It can provide three spray modes: fan, round and wide-angle round; Suitable for most commonly used pipe sizes.
The above are the design features of several common spray nozzles. Each nozzle has its own specific application scenarios and advantages. Choosing a suitable nozzle is crucial to improve work efficiency and effect.
