How do helical anchors perform in expansive soils?

Oct 23, 2025

Leave a message

William Miller
William Miller
William is a logistics coordinator at Zhuji Roundphi. He ensures the smooth transportation of products, whether it's for domestic or international clients, to maintain efficient business operations.

Hey there! I'm a supplier of Helical Anchors, and today I want to dive into how these nifty little things perform in expansive soils. Expansive soils can be a real headache for construction projects, but helical anchors might just be the solution you've been looking for.

First off, let's talk about what expansive soils are. Expansive soils are those that change volume depending on the amount of moisture they contain. When it rains or the soil gets wet, these soils swell up. And when it's dry, they shrink. This constant expansion and contraction can cause a lot of problems for structures built on top of them. Foundations can crack, walls can bow, and even sidewalks can buckle. It's a real mess!

So, how do helical anchors come into play? Well, helical anchors are basically long, screw - like devices that are screwed into the ground. They're made up of a central shaft with helical plates attached to it. These plates act like screws, allowing the anchor to be easily installed into the soil.

One of the key advantages of helical anchors in expansive soils is their ability to reach stable soil layers. Expansive soils usually have a relatively shallow layer of active movement near the surface. By screwing the helical anchor down past this active layer and into more stable soil below, we can ensure that the anchor is firmly fixed. This means that the structure attached to the anchor won't be affected as much by the expansion and contraction of the upper - layer soil.

Let's take a closer look at the installation process. When we install helical anchors in expansive soils, we first use a hydraulic torque motor to turn the anchor into the ground. The helical plates cut through the soil, and as we keep turning, the anchor goes deeper. We can monitor the torque during the installation. A higher torque usually indicates that the anchor is reaching a more competent soil layer. This is important because we want to make sure the anchor is installed to a depth where it can provide the necessary holding capacity.

Once the helical anchor is installed, it starts to work its magic. The helical plates distribute the load from the structure over a larger area of soil. This reduces the stress on the soil and helps prevent the soil from moving too much. In expansive soils, where the soil is constantly changing volume, this load - distribution is crucial. It helps keep the structure stable and prevents damage.

Helical Anchors

Another great thing about helical anchors is their adjustability. If, over time, we notice that the soil is causing some movement in the structure, we can easily adjust the tension on the helical anchor. This can be done by simply turning the anchor a bit more or loosening it slightly. This adjustability gives us a lot of flexibility in dealing with the unpredictable nature of expansive soils.

Now, let's talk about some real - world examples. I've seen helical anchors used in many construction projects on expansive soils. For instance, in a residential building project, the foundation was at risk of cracking due to the expansive soil. We installed helical anchors around the perimeter of the foundation. After a few months, we checked the building, and there were no signs of new cracks or movement. The helical anchors had done their job, keeping the foundation stable despite the changing soil conditions.

In commercial construction, helical anchors are also a popular choice. A shopping mall was being built on a site with expansive soil. Instead of going for traditional deep - foundation methods, which can be time - consuming and expensive, the project managers decided to use helical anchors. The installation was quick, and the mall was able to open on schedule. And since then, there have been no issues with the foundation due to the soil movement.

But it's not all sunshine and rainbows. There are some challenges when using helical anchors in expansive soils. One of the main challenges is the potential for corrosion. Expansive soils can sometimes be more acidic or contain chemicals that can corrode the metal of the helical anchor. To combat this, we usually use galvanized or coated helical anchors. These coatings provide an extra layer of protection and extend the lifespan of the anchor.

Another challenge is the need for proper design. Each site with expansive soil is unique, and the helical anchor system needs to be designed specifically for that site. Factors like the type of soil, the depth of the active layer, and the load requirements of the structure all need to be taken into account. That's why it's important to work with experienced engineers who can design the right helical anchor system for your project.

So, if you're dealing with a construction project on expansive soils, helical anchors are definitely worth considering. They offer a reliable, cost - effective, and adjustable solution to the problems caused by expansive soils. And as a Helical Anchors supplier, I'm here to help you every step of the way. Whether you need advice on the right type of helical anchor for your project, or you're ready to place an order, I'm just a message away.

If you're interested in learning more about how helical anchors can work for your project in expansive soils, or if you want to discuss your specific needs, don't hesitate to reach out. Let's work together to make your construction project a success, even on those tricky expansive soil sites.

References

  • "Foundation Design and Construction" by Joseph E. Bowles
  • "Soil Mechanics and Foundation Engineering" by V. N. S. Murthy
  • Industry reports on helical anchor performance in various soil conditions.
Send Inquiry